Battery charger for permanent installation in a vehicle. 20A with switch mode technology
436£
Exclude 20 % vat
Dimensions
Length:183 mm
Height:98 mm
Width:53 mm
Weight:1.5 KG
Information
Mounting time:60 Min
Shipped within:1 Day
Warranty:12 Mon
X
Add
Product information
The DEFA 1x20A battery charger is based on modern switch mode technology that represents the latest technology in battery charging. This is a guarantee that the battery will have an optimum service life. The charger can be used on all types of lead-acid (AGM, GEL and freely ventilated) batteries.
With Defa’s plug-in system, you can easily build up to a 230v socket and several chargers and cup fan, etc.
The DEFA MultiCharger 1x12A can handle battery sizes up to 300Ah and can maintain the battery for an unlimited period of time without damaging the battery. The charger can handle parallel loads of up to 17A from other extra batteries at the same time as it charges. The charging voltage is temperature-compensated with an external sensor.
NB! Do not forget to supplement with a connection kit.
Technical data:
Input Volt 230V AC
Temperature -35 to +50C
Charging Voltage: 14.4V Dc (temperature compensated approx. 5.0mV/C/cell ref 25C)
Maintain charging 13.5V DC
Charging current: 20A
IP Class : IP44
Certifications: EN60335-1, EN60335-2-29, EN55014-1, EN55014-2, EN61003-3/2
Same actual capacity as a lead-acid battery of 400 Ah – but weighs only 25.5 kg. The M12-200 is a lithium battery with 2.56 kWh of stored energy and a built-in BMS that protects against short circuits, deep discharges, and overheating. With a peak current of 300 A, it manages the heaviest loads without issue. The built-in heating element ensures charging even in the cold. Certified for over 3,000 cycles and can be connected in parallel up to 8 units if needed.