Auxiliary Lights & LED Work Lights / Extra Lights & LED Bars

Canbus reading Inductive incl. relay wiring

Art. Nr:930-CANKEY

CAN-KEY is the quick and safe way to inductively (contactlessly) connect auxiliary lights on modern vehicles with dynamic high beams
252 £
Exclude 20 % vat

Dimensions

Length: 0 mm
Height: 0 mm
Width: 0 mm
Weight: 0.0 KG

Information

Mounting time: 45 Min
Shipped within: 1 Day
Warranty: 12 Mon
X
Add
Product information
CAN-KEY is the quick and safe way to inductively (contactlessly) connect auxiliary lights on modern vehicles with dynamic high beams, LED high beams and the like, where the high beam functions are fully controlled via CAN and do not have a classic 12v/24v supply.
This kit is a complete auxiliary light cable set with data reader, auxiliary light relay, 40A fuse and DT connector for connection to an LED light bar.
The DT connector pin has a maximum load of 13 Amperes (156w at 12v). If a light bar with a higher output is to be used, the DT connector must be cut off.
The rest of the cabling can handle max. 40 Amperes.

Super easy contactless connection without splicing the original cabling
The CAN-KEY is pinched over two existing CAN cables in the engine compartment and reads these via induction.
The original wiring harness is not spliced or soldered and the vehicle's data network is not affected in any way.
No CAN data is transmitted to the system, CAN-KEY only listens and therefore is switched on completely passively.
No tampering with the wiring means no problems with manufacturer warranties or the like!

Can Bus Interface for auxiliary lights

Gives +12 V when the full beam is on. Used to control auxiliary light relays, for example.
88 £
Exclude 20 % vat
Add

EXPLOSION D22 COMBO 120 W 12,000 lumens

A large, round auxiliary light with an attractive design. The light uses reflector and lens technologies to achieve good light distribution, both long and wide.
168 £
Exclude 20 % vat
Add

EXPLOSION MAX LED bar 520 mm,180 W, 16200 lm

A double row bar with combo beam, which gives both a good length and width to the light.
234 £
Exclude 20 % vat
Add

EXPLOSION SLIM LED bar 520 mm, 90 W, 8100 lm

A modern, slim auxiliary light bar. The bar has a spot beam that emits light over a long distance.
192 £
Exclude 20 % vat
Add

EXPLOSION SLIM LED Bar 280 mm, 45 W, 4100 lm

A smaller bar for placement next to radar sensors, for example. With combo beam, which gives a good length and width to the light.
108 £
Exclude 20 % vat
Add

Extra light LED. 5400 lumen (with black background)

Auxiliary lights. 60 watt 5400 lumen, dimensions 180 mm x 180 mm, depth 5 mm. IP68 waterproof.
84 £
Exclude 20 % vat
Add
Trustpilot
image
Attention...

You did not add products to the cart!

Do you want to add them to the cart?

loader