Cargo Securing Kit Berlingo L1

Securing your load is important for safety. Here you will find kits for securing loads. This gives you good possibilities for movable and flexible anchoring points in your transport vehicle, van or trailer. The anchoring rail can be easily mounted on walls as well as on floor beams.
Berlingo L1 / Protective Cladding & Load Securing / Cargo Securing Kit

Airline rail kit 973mm

Rail with 973mm length including 2 eyebolts and an automatic strap.
105 £
Exclude 20 % vat
Add

Airline rail kit 1473mm

Rail with 1473mm length including 3 eyebolts and an automatic strap.
150 £
Exclude 20 % vat
Add

Airline rail kit 473 mm

Rail with 473 mm length including 2 eyebolts and an automatic strap.
69 £
Exclude 20 % vat
Add

Airline rail kit 1973mm

Rail with 1973mm length including 3 eyebolts and an automatic strap.
186 £
Exclude 20 % vat
Add
Trustpilot

FAQ for Cargo Securing Kit

For load securing with tie-down straps, they must comply with the European standard EN 12195-2. The straps should be marked with the maximum allowable force and length. It is important that the straps are correctly fastened and that the load is secured so that it cannot move during transport.

To calculate load securing, you should consider the weight and size of the load, the vehicle's capacity, and the types of roads the vehicle will travel on. It is advisable to use calculation tools or tables available from transport authorities or industry organizations to determine the best way to secure the load.

For road transport, the load must be secured so that it cannot cause danger or damage. This means that the load must not be able to slide, tip over, roll, move, or otherwise change position in a way that could affect the vehicle's stability or maneuverability. It is the transporter's responsibility to ensure that the load securing meets the applicable regulations and requirements.

image
Attention...

You did not add products to the cart!

Do you want to add them to the cart?

loader